スマートフォンを縦にしてご覧ください
Please rotate your phone
environmentenvironment
machine-outline

CARBON NEUTRAL

backgroundbackground

FEATURE

SPEEDIO’s Environmental Performance

To achieve carbon neutral

While retaining the #30 spindle, and based on Brother’s original technology, the SPEEDIO strives for industry-leading environmental performance, in addition to overwhelming high productivity, machining capabilities, and usability.

SPEEDIO
speedio outline

When machining is performed
by replacing a general #40
machining center with the SPEEDIO,
Power consumption reduced
by approx. 80%

The SPEEDIO has been developed with a focus on high speed and high efficiency. Compared to #40 machining centers, the SPEEDIO provides faster machining speed and superior energy efficiency.

Machining time can be shortened, contributing to reduction in power consumption per cycle. Shortening working hours can also contribute to reduction in power consumption for plantwide air conditioning, lighting etc.

* Data taken running machining program created by Brother

leafleaf
leafleaf
leaf

TECHNOLOGY

Technology to Achieve Energy Saving

Low power consumption

  1. 1.The SPEEDIO has achieved energy saving by combining the IPM motor with a power regeneration system.

    Power regeneration system

    Power regeneration system

    Equipped with a power regeneration system that reuses energy generated when the spindle motor decelerates.

    IPM motor

    IPM motor is used for the spindle motor

    As a permanent magnet is used in the rotor, there is no need to apply current to produce magnetic flux. This means that the IPM motor is more effective and can start quickly, compared to a general induction motor. In addition, this highly efficient motor with high torque in the medium- and high-speed range enables higher work efficiency and energy saving.

  2. 2.Low power consumption achieved by providing various energy saving functions.

    Energy saving NC functions

    Energy saving NC functions

    Equipped with Automatic coolant off, Standby mode, Automatic work light off, Automatic power off, etc.

    Energy saving pump

    Energy saving pump

    An impeller suitable for the usage conditions, including pressure and flowrate, is used to pump coolant effectively.

    LED work light

    LED work light

    LED lights with less power consumption than normal lights are optionally available, achieving extended service life and energy saving.

Low air consumption

Air consumption load have been reduced by eliminating all possible waste to optimize functions. High environmental performance.
Compared to a general machining center, air consumption is reduced by approx. 80%.

Air purge

Air purge

After substantial flowrate analysis, a highly sealed structure that prevents the coolant penetrating the spindle even with less air purge has been achieved. Greatly reduces air consumption.

Spindle air blow

Spindle air blow

While reducing air consumption by half, three times the conventional volume of air is discharged only when required to enhance cleaning power. Compared to the case of using only a pump, cleaning is possible with less power consumption.

speedio
Cutting Out the Waste

SPEEDIO is a brand of #30 machine for customers who demand high productivity, which has high machining ability while having compactness and speed not found in #40, and is eco-friendly.

READ MORE

LINE UP

SPEEDIO
  • S

    Compact Machining Center

    • S300X2

      S300X2
      S300X2
      Travels (mm) X:300 Y:400 Z:300
      VIEW MORE
    • S500X2

      S500X2
      S500X2
      Travels (mm) X:500 Y:400 Z:300
      VIEW MORE
    • S700X2

      S700X2
      S700X2
      Travels (mm) X:700 Y:400 Z:300
      VIEW MORE
    • S1000X1

      S1000X1
      S1000X1
      Travels (mm) X:1,000 Y:500 Z:300
      VIEW MORE
  • W

    Wide Travel
    Compact
    Machining Center

    • W1000Xd1

      W1000Xd1
      W1000Xd1
      Travels (mm) X:1,000 Y:500 Z:300
      VIEW MORE
  • F

    High Rigidity
    Compact Machining Center

    • F600X1

      F600X1
      F600X1
      Travels (mm) X:600 Y:400 Z:350
      VIEW MORE
  • R

    Pallet Changing
    Compact Machining Center

    • R450X2

      R450X2
      R450X2
      Travels (mm) X:450 Y:320 Z:305
      VIEW MORE
    • R650X2

      R650X2
      R650X2
      Travels (mm) 14/22pcs X:650 Y:400 Z:305, 40pcs X:650 Y:400 Z:435
      VIEW MORE
  • M

    Compact Multi-task Machine

    • M140X2

      M140X2
      M140X2
      Travels (mm) X:200 Y:440 Z:305
      VIEW MORE
    • M200X3

      M200X3
      M200X3
      Travels (mm) X:200 Y:440 Z:305
      VIEW MORE
    • M300X3

      M300X3
      M300X3
      Travels (mm) X:300 Y:440 Z:305
      VIEW MORE
  • Special options

    • T-200A/T-200Ad

      T-200A/T-200Ad
      T-200A/T-200Ad
      Rotary Table High accuracy, High productivity. Maximum loading capacity (kg) 100 (When support table is used 200)
      VIEW MORE
    • BV7-870

      BV7-870
      BV7-870
      Simple and compact man-power saving system. Rated transferable weight (kg) 7
      VIEW MORE