Wasted Energy Reduction
Equipped with various energy-saving functions, including a power regeneration system. Air consumption optimized by eliminating any unnecessary functions reduces wasted energy.
Saving power
-
Highly efficient spindle motor
Brother’s original high acceleration/ deceleration type synchronous motor provides fast response to rotation and stop, achieving highly efficient cutting with less power.
-
Power regeneration system
Equipped with a power regeneration system that recycles energy generated when a servo motor decelerates.
-
Power consumption app
Servomotors, pumps, and other equipment are grouped and displayed according to purpose. Calculation is possible for each cycle.
-
Energy-saving NC functions
- Energy saving mode
- Added a function to turn on/off the following energy-saving functions simultaneously.
- Standby mode
- Turns the servomotor off when the machine is not operated for the preset time.
- Automatic work light off
- Turns the work light off when the preset time elapses.
- Automatic power off
- Turns the NC power off at the preset time.
- Automatic display off
- Turns the backlight of the screen off when the screen is not operated for the preset time.
- Automatic coolant off
- Turns the coolant pump off when the preset time elapses.
-
Chip shower energy savings operation
This function controls the on/off timing of the chip shower pump. Operation is switched via parameters according to the amount of chips discharged, contributing to energy saving for chip shower pumps that consume significant amounts of power.
Saving air
Air related functions have been reviewed and optimized to eliminate any waste, leading to reduction in air consumption.
-
Air purge
Repeated flowrate analysis has achieved a highly airtight structure that prevents coolant from entering the spindle even with less air purge. Amount of air used is significantly reduced.
-
Spindle air blow
Amount of air used is reduced by discharging three times the conventional volume of air only when required.