SPEEDIO R650X2 40tools

Compare

Contact Distributor

Discontinued Product

Discontinued Product

SPEEDIO R650X2 40tools

Pallet Changing Compact Machining Center

Pallet Changer
40 Tool Magazine

Travels (mm): X: 650 Y: 400 Z: 435
Max. spindle speed (min^-1): 10,000/ (Optional) 16,000/ (Optional) 10,000 high-torque
Tool storage capacity(pcs.): 40

Select variant: R650X2 40tools

Equipped with SPEEDIO's Largest Tool Magazine! Large Jig Mountable Pallet Changer Machine

Information

QT table

The QT (Quick Turn) table is Brother's original turn table type high-speed 2-face pallet changer. High-speed pallet change is enabled by avoiding lift-up operation while achieving high reliability through a sealed structure. Workpieces on one pallet can be changed while machining workpieces on the other pallet. Therefore, waste in workpiece change time is eliminated, enabling nonstop machining.

Pallet change time

3.4s

Machining area

Making use of Brother’s original pallet changer technologies, the machine provides sufficient travels and a large jig area, which are not available on conventional #30 machines standard equipped with a pallet changer.

X-axis travel distance : 650mm
Y-axis travel distance : 400mm

The turning diameter and the table size have been increased, enabling the mounting of large jigs. In particular, this makes mounting a trunnion jig using a rotary table easier.

Turning diameter : 1,250mm (max. 1,300 mm)
Jig height : 350mm (low table: 420 mm)
Leading capacity(one face) : 200kg (max. 300 kg)
Work area size(one face) : 800x400mm

Expandability

To enable the mounting of much larger jigs, two options are available: a low-floor table option that increases the jig height and a turning diameter enlargement option that increases the turning diameter to 1,300 mm. The loading capacity can also be increased to 300 kg (one face).

*: The parameter must be changed.

40-tool storage capacity

R650X2 can select tool storage capacity 14 pcs, 22 pcs and 40 pcs. This model is suitable to improve the productivity by process integration with a pallet changer.

A shutter is equipped at tool pot in order to separate the machining area and tool magazine room. This structure prevent chip from coming into magazine room.

Productivity

Enhanced speed and acceleration, and optimal control with any waste operation and time eliminated, drive machine performance to the fullest, demonstrating high productivity.

Spindle start/stop time

0.15s

High-speed tool change is achieved by increasing the speed of, and optimizing the control for, spindle start/stop, Z-axis up/down, and magazine operation.

Tool change time
40-tool / 22-tool / 14-tool

Tool - Tool : 0.9s / 0.8s / 0.7s
Chip - Chip : 2.6s / 1.6s / 1.4s

Machining capabilities

The highly rigid structure and a high-power spindle motor provide high-range machining capabilities from heavy-duty machining to high-speed high-efficiency machining.

Reliability

High reliability is achieved by improving chip discharge performance and enhancing maintenance functions, contributing to the improvement of the machine's operating rate.

Environmental performance

Various energy saving functions, such as Power regeneration system, Energy saving pump, LED type work light and Highly efficient spindle motor reduce power consumption, achieving high environmental performance.

Product Specification

R650X2 40tools

Max. spindle speed

10,000/ (Optional) 16,000/ (Optional) 10,000 high-torque

Travels

X: 650 Y: 400 Z: 435

Tool storage capacity

Rapid traverse rate (XYZ-area)

50 x 50 x 50

Required Floor Space

2,145 x 3,248

BT dual contact spindle(BIG-PLUS)

Optional

Coolant Through Spindle(CTS)

Optional

Low floor table

Optional

Machine Specification

R650X2^*10			14/22 tool	40-tool
CNC Unit			CNC-C00
Travels	X axis [mm (inch)]		650 (25.6)
	Y axis [mm (inch)]		400 (15.7)
	Z axis [mm (inch)]		305 (12.0)	435 (17.1)
	Distance between table top and spindle nose end [mm (inch)]		250 - 555 (9.8 - 21.8) [320 - 625 (12.6 - 24.6)]^*7	250 - 685 (9.8 - 27.0) [320 - 755 (12.6 - 29.7)]^*7
Table	Work area size [mm (inch)]		One face 800 x 400 (31.5 x 15.7)
Table	Max.loading capacity (uniform load) [kg (lbs)]		One face 200 (441) [300 (661)]^*6
Spindle	Spindle speed [min-^-1]		10,000min^-1specifications：10 - 10,000 16,000min^-1specifications：16 - 16,000 10,000min^-1high-torque specifications(optional)：10 - 10,000
	Speed during tapping [min-^-1]		MAX. 6,000
	Tapered hole		7/24 tapered No.30
	BT dual contact system (BIG-PLUS)		Optional
	Coolant Through Spindle (CTS)		Optional
Feed rate	Rapid traverse rate (XYZ-area) [m/min (inch/min)]		50 x 50 x 50 (1,969 x 1,969 x 1,969)
Feed rate	Cutting feed rate [mm/min (inch/min)]		X,Y,Z axis ： 1 - 30,000（0.04 - 1,181）^*8
ATC unit	Tool shank type		MAS-BT30
	Pull stud type^*4		MAS.P30T-2
	Tool storage capacity [pcs.]		14 / 22	40
	Max. tool length [mm (inch)]		200 (7.9)	250 (9.8)
	Max. tool diameter [mm (inch)]		80 (3.1)	55 (2.1) / 125 (4.9) No adjacent tool
	Max. tool weight ^*1 [kg (lbs)]		3.0(6.6) [total tool weight : 25(55.1) for 14 tools, 40(88.2) for 22 tools]	4.0(8.8) [total tool weight : 80(176.3)]
	Tool selection method		Random shortcut method	Double arm method (random closest path)
Tool change time^*5	Tool To Tool [sec.]		0.7/0.8 (14 tool/22 tool)	0.9
Tool change time^*5	Chip To Chip [sec.]		1.4/1.6 (14 tool/22 tool)	2.6
Electric motor	Main spindle motor (10 min/continuous) ^*2 [kW]		10,000min^-1specifications：10.1/7.0 16,000min^-1specifications：7.4/5.1 10,000min^-1high-torque specifications：12.8/9.2
Electric motor	Axis feed motor [kW]		1.0 (X,Y), 1.8 (Z)
Power source	Power supply		AC200V ±10%, 50/60Hz ±1Hz
	Power capacity (continuous) [kVA]		10,000min^-1 specifications : 9.5 16,000min^-1 specifications : 9.5 10,000min^-1 high-torque specifications : 10.4
	Air supply	Regular air pressure [MPa]	0.4 - 0.6 (recommended value : 0.5MPa) ^*9
	Air supply	Required flow [L/min]	50	100
Machine dimensions	機Height [mm (inch)]		2,696 (106.1)
	Required floor space (with control unit door open) [mm (inch)]		1,897 x 3,448 [3,868] (74.7 x 135.7 [152.3])	2,145 x 3,248 [3,868] (84.4 x 127.9 [152.3])
	Weight [kg (lbs)]		3,500 (7,716)	4,000 (8,818)
Accuracy^*3	Accuracy of bidirectional axis positioning (ISO230-2:2006) [mm (inch)]		0.006 - 0.020 (0.00024 - 0.00079)
Accuracy^*3	Repeatability of bidirectional axis positioning (ISO230-2:2006) [mm (inch)]		Less than 0.004 (0.00016)
Standard accessories			Instructin manual (1 set), Anchor bolts (5 pcs.), Leveling bolts (5 pcs.)

*1 Maximum tool weight differs depending on the configuration and center of gravity. The figures shown here are for reference only.
*2 Spindle motor output differs depending on the spindle speed.
*3 Measured in compliance with ISO standards and Brother standards. Please contact Brother for details.
*4 Brother specifications apply to the pull studs for CTS.
*5 Measured in compliance with JIS B6336-9 and MAS011-1987.
*6 Can be increased up to 300kg (one face) by changing the parameter. Please consult us separately.
*7 Values when the low-floor table is selected.
*8 When using high accuracy mode B. When not using high accuracy mode B, 1 to 10,000 mm/min for X/Y-axes and 1 to 20,000 mm/min for Z-axis.
*9 Regular air pressure varies depending on the machine specifications, machining program details, or use of peripheral equipment. Set the pressure higher than the recommended value.
*10 The machine needs yo be equipped with a relocation detectiondepending on the destination.Machine equipped with a relocation detection device come with “RD”at the end the model name.

Quick turn table specifications

Type	0 deg./180 deg. turntable system
Table dimension [mm (inch)]	800 x 535 (31.5 x 21.1) (one face)
Max. turning diameter [mm (inch)]	D1,250 (49.2) [D1,300 (51.2)]^*1
Max. jig height [mm (inch)]	350 (13.8) [420 (16.5)]^*2
Table work area size [mm (inch)]	800 x 400 (31.5 x 15.7 ) (one face)
Max. loading capacity [kg (lds)]	200 (441) [300 (661)] (one face)^*3
Rated table load inertia for turning axis [kg·m²]	35.8 [53.7](one face)^*3
Table turning system	AC servo motor (0.82kW) Worm gear (total speed reduction ratio:1/60)
Table position time	3.4s^*4
Table change repeatability [mm (inch)]	0.01 (0.0004) (in the X,Y, and Z axes directions 335 (13.2) from the center of rotation)

*1 When the turning diameter enlargement option is selected.
*2 Values when the low-floor table is selected.
*3 Can be increased up to 200kg (one face) by changing the parameter. Please consult us separately.
*4 When the loading capacity is 200 kg (one face)

※ Quick turn table is a turntable type 2-face pallet changer

NC unit specifications

CNC model		CNC-C00
Control axes		7 axes (X,Y,Z,4 additional axes)
Simultaneously controlled axes	Positioning	5 axes (X, Y, Z, A, B)
Simultaneously controlled axes	Interpolation	Linear : 4 axes (X, Y, Z one additional axis) Circular : 2 axes Helical/conical : 3 axes (X, Y, Z)
Least input increment		0.001mm, 0.0001inch, 0.001 deg.
Max.programmable dimension		±9999.999mm　±999.9999inch
Display		12.1-inch color LCD
Memory capacity		Approx.100 Mbytes (Total capacity of program and data bank)
External communication		USB memory interface, Ethernet, RS232C
No.of registrable programs		4,000 (Total capacity of program and data bank)
Program format		NC language, conversation (changed by parameter) conversion from conversation program to NC language program available
NC function		Absolute / incremental Inch / metric Corner C / Corner R Rotational transformation Synchronized tap Coordinate system setting Dry run Restart Backlash compensation Rapid traverse override Cutting feed override Alarm history (1,000 pieces) Startus log Machine lock Computer remote Built-in PLC Motor insulation resistance measurement Operation log High-accuracy mode A III Tool length measurement Tool life management / spare tool Background editing Graphic display Subprogram Herical / conical interpolation Standby mode (energy saving function) Chip shower off delay Tap return function Automatic work light off (energy saving function) Automatic workpiece measurement^*1 Heat expansion compensation system II (X,Y,Z axes) Automatic power off (energy saving function) Automatic coolant off (energy saving function) Tool washing filter with filter clogging detection Waveform display Operation level External input signal key High accuracy mode BI (look-ahead 30blocks) Waveform output to memory card Screen shot Auto notication Inverse time feed Spindle load monitoring function (NC) Expanded workpice coordinate system Scaling Mirror image Menu programming Program compensation Tool length compensation Cutter compensation Macro function Local coordinate system One-way positioning Opeation in tape mode (Conversation) Operation program Schedule program Automatic tool selection Automatic cutting condition setting Autmatic tool length compensation setting Autmatic cutter compensation setting Autmatic calculation of unknown number input Machining order control
Optional NC functions		Memory expansion (Approx.500 Mbytes) High accuracy mode BⅡ (look-ahead 200 blocks, smooth path offset) Spindle override (NC) Submicron command ^*2 Interrupt type macro Rotary fixture offset Feature coordinates setting

*1 Measuring instrument needs to be prepared by users.
*2 When the submicron command is used, changing to the conversation program is disabled.
*3 Minute block processing time can be changed.

*: Number of "control axes" and/or "simultaneously controlled axes" are the maximum number of axes, which will differ depending on the destination country and the machine specifications.
*: Ethernet is a trademark or registered trademark of XEROX in the United States.
*: Functions listed under (NC) and (Conversation) are available only for NC programs and conversation programs respectively.

For options, please contact us.

Example1　Multiple parts machining