- Support & Download
- About Brother
Equipped with a newly developed tilting rotary table with a maximum jig area of 500 mm in diameter.
Combination with a 28-tool magazine enables multi-face machining that breaks the conventional concept of #30 machines.
Equipped with tilting rotary table with jig area of ø500
New structure for process integration with less space
One-clamp machining encourages process integration.
Tilting rotary table
Machining area in Z/Y-axes directions
Ample jig/workpiece/tool area secured in the Z-axis direction. (Distance between table top and spindle nose end: 445 mm)
The Y-axis travel range has been shifted from the center of the tilt axis to secure sufficient machining area when the tilt axis is at 90 degrees. (Y-axis travel when A-axis is at 90 degrees: 270 mm)
Untiring pursuit of high productivity
Reduction in waste by optimizing control through machine/controller integrated development
High-speed tool change has been achieved by faster and optimized spindle start/stop, Z-axis up/down, and magazine operation. Tools up to 3 kg can be changed in the shortest time. Tools up to 4 kg can also be changed with minimal increase in time.
Highly rigid machine structure and highly efficient spindle motor enable a broad range of machiningReliable and trustworthy machine structure has been achieved.
Equipped with a highly efficient spindle motor that demonstrates sufficient torque from the low- to high-speed range.
Achieves highly efficient machining in various industries, from automobile to general machinery, medical, and aircraft industries.
Tool center point control has been added to support simultaneous five-axis machining.*
*Available only for the U500Xd1-5AX.
XYZ axes based on S500Xd1
Highly efficient spindle motor
High clamp torque
Simultaneous 5-axis machining
Tool center point control comes with a variety of functions. This achieves high-speed and highly accurate simultaneous 5-axis machining in combination with a backlash-free tilting rotary table.
Tool center point control
Equipped with tool center point control where machining is performed by changing the tool direction relative to the workpiece.
Optimal acceleration by look-ahead up to 1,000 blocks achieves simultaneous 5-axis machining.
Equipped with new “CNC-D00” controller
Enhanced usability with 15-inch LCD touch panel
New user interface
Introduction of Customer Success Stories.