SPEEDIO S500X1

Compare

Contact Distributor

Discontinued Product

Discontinued Product

SPEEDIO S500X1

Compact Machining Center

14 Tool Magazine
21 Tool Magazine

Travels (mm): X: 500 Y: 400 Z: 300
Max. spindle speed (min^-1): 10,000/ (Optional) 16,000/ (Optional) 27,000/ (Optional) 10,000 high-torque
Tool storage capacity(pcs.): 14/ 21

Select variant: S700X1

The SPEEDIO maximizes productive efficiency improvement of mass-production parts such as automobile, motorcycle and information technology.

Information

The machine has achieved overwhelming high productivity as a result of achieving high acceleration and quick response. In particular, Z-axis acceleration has been greatly improved, which is highly effective for improvement of productivity.

Achievement of high acceleration

As the Z-axis moves most frequently, Z-axis acceleration has been improved to twice the former model.

Z-axis acceleration

Former model → SPEEDIO
1.1G → 2.2G

The X/Y-axes optimal acceleration setting function sets the most appropriate acceleration according to the table loading capacity.

* Acceleration for the S500X1. The loading capacity needs to be set via parameter.

Optimal acceleration according to loading capacity (X/Y-axes)

Max. load → 150kg. load
1.4G / 1.1G → 2.0G / 1.3G

Highly-responsive servo motor

Delay in response has been reduced to almost zero by increasing the responsiveness of the servo motor. For example, high-speed synchronized tapping at the fastest level in the world is completed within much shorter time.

Nonstop ATC

Tool change time is minimized by optimizing the magazine operation and improving the Z-axis acceleration, in addition to the shorter start and stop time of the spindle.

Former model → SPEEDIO
Chip - Chip 1.6S → 1.4S

Former model → SPEEDIO
Tool - Tool 0.9S → 0.8S

Simultaneous operation control

Further reduction of waste time achieved by positioning X/Y and additional axes simultaneously with tool change.

Technologies accumulated over years to enhance machine rigidity, and use of a high-power spindle motor allow the machine to demonstrate its broad machining capabilities from high-speed, high-ef¬ciency machining to heavy-duty machining.

Highly rigid structure

Based on accumulated analysis technology data, the machine uses a structure that effectively further improves its rigidity.

High-power spindle motor

Spindle motor torque

Standard specs

Max. torque (momentary): 40Nm
Max. output: 18.9kW

High-torque specs (Optional)

Max. torque (momentary): 92Nm
Max. output: 26.2kW

Pursuit of high accuracy

Resolution of the encoder has greatly improved and various offset functions have been added. These improvements achieve high accuracy for circular machining and pitch machining. The machine structure used is not easily affected by heat expansion due to coolant.

High-speed three-dimensional machining

High-speed and highly accurate three-dimensional machining has been achieved by high-speed spindle specifications and Brother's original three-dimensional machining control, such as the 200-block look-ahead function and smooth path offset function.

High-speed spindle specs (Optional)

Max. spindle speed: 27,000min^-1

Look-ahead function

High accuracy mode BⅠ (Standard): 30 blocks
High accuracy mode BⅡ(Optional ): 200 blocks

The machine is equipped with the CNC-C00 series next generation NC unit with greatly improved processing capabilities and functions, and enhanced usability.

Operability

Equipped with 'shortcut' keys to quickly open the desired screen and 'sub folder' to make program management easier, in addition to the USB memory interface, menu programming and tap return function.

Network function

High capacity program data can be transferred via Ethernet at high speed. The simple production monitoring function is also available allowing you to monitor the machine's status.

Machining support functions

Equipped with machining support functions, such as torque waveform display,high accuracy mode, and heat expansion compensation system.

Maintenance functions

Equipped with motor insulation resistance measurement, operationlog, and maintenance notice function.

System capacity

Standard equipped with PLC. Input and output points can be extended to up to 1024 points each (Optional).

Product Specification

S500X1

Max. spindle speed

10,000/ (Optional) 16,000/ (Optional) 27,000/ (Optional) 10,000 high-torque

Travels

X: 500 Y: 400 Z: 300

Tool storage capacity

14/ 21

Rapid traverse rate (XYZ-area)

50 x 50 x 56

Required Floor Space

1,560 x 2,220

BT dual contact spindle(BIG-PLUS)

Optional

Coolant Through Spindle(CTS)

Optional

Machine Specification

Item			S700X1	S500X1	S300X1
CNC Unit			CNC-C00
Travels	X axis [mm (inch)]		700 (27.6)	500 (19.7)	300 (11.8)
	Y axis [mm (inch)]		400 (15.7)
	Z axis [mm (inch)]		300 (11.8)
	Distance between table top and spindle nose end [mm (inch)]		180 ~ 480 (7.1 ~ 18.9)
Table	Work area size [mm (inch)]		800 x 400(31.5 x 15.7)	600 x 400(23.6 x 15.7)	600 x 400(23.6 x 15.7)
Table	Max.loading capacity (uniform load) [kg (lbs)]		250 [300] (551 [661])^*6
Spindle	Spindle speed [min^-1]		10,000min^-1 specifications: 10 ~ 10,000 16,000min^-1 specifications(Optional) : 16 ~ 16,000 10,000min^-1 high-torque specifications(Optional) : 10 ~ 10,000 27,000min^-1 specifications(Optional) : 27 ~ 27,000
	Speed during tapping [min^-1]		Max. 6,000 (27,000min^-1 specifications : Max. 8,000)
	Tapered hole		7/24 tapered No.30
	BT dual contact system (BIG-PLUS)		Optional
	Coolant Through Spindle (CTS)		Optional(CTS option is not available for 27,000min^-1 spec.)
Feed rate	Rapid traverse rate (XYZ-area) [m/min (inch/min)]		50 x 50 x 56 (1,969 x 1,969 x 2,205)
Feed rate	Cutting feed rate [mm/min (inch/min)]		X,Y,Z: 1 ~ 30,000 ( 0.04 ~ 1,181)^*7
ATC unit	Tool shank type		MAS-BT30
	Pull stad type^*4		MAS-P30T-2
	Tool storage capacity [pcs.]		14 / 21
	Max.tool length [mm (inch)]		250 (9.8)		160 (6.3) [21tool] 250 (9.8) [14tool]
	Max.tool diameter [mm (inch)]^*1		110 (4.3)
	Max.tool weight [kg (lbs)]^*1(kg)		3.0(6.6) / Tool (TOTAL TOOL WEIGHT:25(55.1) for 14 tools,35(77.2) for 21 tools)
	Tool selection method		Random shortcut method
	Tool change time^*5		Tool To Tool[sec.]: 0.8 / Chip To Chip[sec.]: 1.4 / Cut To Cut[sec.]: 1.2
Electric motor	Main spindle motor (10 min/continuous)[kW]^*2		10,000min^-1 specifications : 10.1/6.7 16,000min^-1 specifications(Optional) : 7.4/4.9 10,000min^-1 high-torque specifications(Optional) : 12.8/8.8 27,000min^-1 specifications(Optional) : 8.9/6.3
Electric motor	Axis feed motor [kW]		X,Y: 1.0 / Z: 2.0
Power source	Power supply		AC200V ±10%, 50/60Hz ±1Hz
	Power capacity (continuous) [kVA]		10,000min^-1 specifications : 9.5 16,000min^-1 specifications(Optional) : 9.5 10,000min^-1 high-torque specifications(Optional) : 10.4A 27,000min^-1 specifications(Optional) : 9.5
	Air supply	Regular air pressure [MPa]	0.4 ~ 0.6(recommended value : 0.5MPa)^*8
	Air supply	Required flow [L/min]	45 (27,000min^-1 specifications:115)
Machine dimensions	Height [mm (inch)]		2,497 (98.3)
	Required floor space (with control unit door open) [mm (inch)]		2,050 x 2,220[ 2,692] (80.7 x 87.4[ 106.0])	1,560 x 2,220[ 2,692] (61.4 x 87.4[ 106.0])	1,080 x 2,557[ 2,776] (42.5 x 100.7[ 109.3])
	Weight (including control unit, machine cover) [kg (lbs)]		2,400 (5,291)	2,250 (4,960)	2,200 (4,850)
Accuracy^*3	Accuracy of bidirectional axis positioning ( ISO230-2:2006 ) [mm (inch)]		0.006 ~ 0.020 ( 0.00024 ~ 0.00079 )
Accuracy^*3	Repeatability of bidirectional axis positioning ( ISO230-2:2006 ) [mm (inch)]		Less than 0.004 (0.00016 )
Front door			2doors
Standard accessories			Instruction Manual (1 set), anchor bolts (4 pcs.), leveling bolts (4 pcs.),machine cover (manual door )

*1 Actual tool weight differs depending on the configuration and center of gravity.The figures shown here are for reference only.
*2 Spindle motor output differs depending on the spindle speed.
*3 Measured in compliance with ISO standards and Brother standards.
*4 Brother specifications apply to the pull studs for CTS.
*5 Measured in compliance with JIS B6336-9 and MAS011-1987.
*6 Acceleration must be adjusted for X and Y axes.
*7 When using high accuracy mode B.
*8 Regular air pressure varies depending on the machine specifications, machining program details, or use of peripheral equipment. Set the pressure higher than the recommended value.

NC Unit specifications

CNC model		CNC-C00
Control axes		5axes ( X, Y, Z, additional axes)
Simultaneously controlled axes	Positioning	5 axes (X, Y, Z, A, B)
Simultaneously controlled axes	Interpolation	Linear : 4 axes ( X, Y, Z, one additional axis) Circular : 2 axes Helical / conical : 3 axes (X, Y, Z)
Least input increment		0.001mm, 0.0001inch, 0.001°
Max.programmable dimension		±9999.999mm, ±999.9999inch
Display		12.1-inch color LCD
Memory capacity		Approx.100 Mbytes (Total capacity of program and data bank)
External communication		USB memory interface, Ethernet, RS232C 1ch
No.of registrable programs		4,000 (Total capacity of program and data bank)
Program format		NC language, conversation (changed by parameter) conversion from conversation program to NC language program available
Standard NC functions		Absolute/incremental Inch/metric Corner C/Corner R Rotational transformation Synchronized tap Coordinate system setting Dry run Restart Backlash compensation Pitch error compensation Raid traverse override Cutting feed override Alarm history(1,000 pieces) Startus log Machine lock Computer remote Built-in PLC Motor insulation resistance measurement Operation log High accuracy mode B I (look-ahead 30blocks) High-accuracy mode A III Tool length measurement Tool life management / spare tool Background editing Graphic display Subprogram Herical/conical interpolation Tool washing lter with lter clogging detection Automatic power off (energy saving function) Servomotor off standby mode (energy saving function) Chip shower off delay Automatic coolant off (energy saving function) Automatic work light off (energy saving function) Heat expansion compensation system II (X,Y,Z axes) Tap return function Automatic workpiece measurement^*1 Waveform display Operation level External input signal key Expanded workpice coordinate system(NC) Scaling(NC) Mirror image(NC) Menu programming(NC) Program compensation(NC) Tool length compensation(NC) Cutter compensation(NC) Macro function(NC) Local coordinate system(NC) One-way positioning(NC) Opeation in tape mode(NC) Operation program(Conv.) Schedule program(Conv.) Automatic tool selection(Conv.) Automatic cutting condition setting(Conv.) Autmatic tool length compensation setting(Conv.) Autmatic cutter compensation setting(Conv.) Autmatic calculation of unknown number input(Conv.) Machining order control(Conv.)
Optional NC functions		Memory expansion (Approx. 500 Mbytes) High accuracy mode B II (look-ahead 200 blocks, smooth path offset) Spindle override Submicron command (NC) ^※2 Interrupt type macro (NC)

* When program size is bigger than 2 Mbytes. machine works with extended memory operation.
* Ethernet is a trademark or registered trademark of XEROX in the United States.
* Functions listed under (NC) and (Conversation) are available only for NC programs and conversation programs respectively.
*1 Measuring instrument needs to be prepared by users.
*2 When the submicron command is used, changing to the conversation program is disabled.