- Products
- Support & Download
- Solutions
- Contacts
- About Brother
SPEEDIO
W1000Xd1 Specifications
"Machining larger workpieces using #30 machine" The release of the W1000Xd1 machining center sees an override in the conventional machining areas of #30 machines.
Equipped with new NC controller
Machine specifications
item | W1000Xd1 / W1000Xd1 RD*9 | ||
---|---|---|---|
CNC unit | CNC-D00 | ||
Travels | X axis [mm (inch)] | 1,000 (39.4) | |
Y axis [mm (inch)] | 500 (19.7) | ||
Z axis [mm (inch)] | 300 (11.8) | ||
Distance between table top and spindle nose end [mm (inch)] | 180~480 (7.1~18.9) | ||
Table | Work area size [mm (inch)] | 1,100 x 500 (43.3 x 19.7) | |
Max.loading capacity (uniform load) [kg (lbs)] | 300[400] (661.3[881.8])*1 | ||
Spindle | Spindle speed [min-1] | 10,000min-1 specifications : 1 - 10,000
10,000min-1 high-torque specifications(Optional) : 1 - 10,000 16,000min-1 specifications(Optional) : 1 - 16,000 |
|
Speed during tapping [min-1] | MAX. 6,000 | ||
Tapered hole | 7/24 tapered No.30 | ||
BT dual contact system (BIG-PLUS) | Optional | ||
Coolant Through Spindle (CTS) | 1.5 / 7.0 MPa Optional | ||
Feed rate | Rapid traverse rate (XYZ-area) [m/min (inch/min)] | 50 x 50 x 56 (1,969 x 1,969 x 2,205) | |
Cutting feed rate [mm/min (inch/min)] | X, Y, Z : 1 - 30,000 (0.04 - 1,181)*2 | ||
ATC unit | Tool shank type | MAS-BT30 | |
Pull stud type*3 | MAS-P30T-2 | ||
Tool storage capacity [pcs.] | 14/21 | ||
Max. tool length [mm (inch)] | 250 (9.8) | ||
Max. tool diameter [mm (inch)] | ⌀110 (4.3) | ||
Max. tool weight [kg (lbs)]*4 | 3.0(6.6) [4.0(8.8)] (Total tool weight : 25(55.1) for 14 tools, 35(77.2) for 21 tools) | ||
Tool selection method | Random shortcut method | ||
Tool change time*6 | Tool To Tool : 0.6sec.
Chip To Chip : 1.2sec. |
||
Electric motor | Main spindle motor (10 min/continuous) [kW]*7 | 10,000min-1 specifications : 10.1/7.0
10,000min-1 high-torque specifications(Optional) : 12.8/9.2 16,000min-1 specifications(Optional) : 7.4/5.1 |
|
Axis feed motor [kW] | X,Y : 1.0 Z : 2.0 | ||
Power source | Power supply | AC 200 to 230 V±10%, 3-phase, 50/60Hz±2% | |
Power capacity (continuous) [kVA] | 10,000min-1 specifications : 9.5
10,000min-1 high-torque specifications(Optional) : 10.4 16,000min-1 specifications(Optional) : 9.5 |
||
Air supply | Regular air pressure [MPa] | 0.4 - 0.6 (recommended value : 0.5MPa)*8 | |
Required flow [L/min] | 45 | ||
Machine dimensions | Height [mm (inch)] | 2,553 (100.5) | |
Required floor space (with control unit door open) [mm (inch)] | 2,410 x 2,443[3,072] (94.9 x 96.2[121.0]) | ||
Weight (including control unit, machine cover) [kg (lbs)] | 3,350 (7,386) | ||
Accuracy*9 | Accuracy of bidirectional axis positioning (ISO230-2:1988) [mm (inch)] | 0.006 - 0.020 (0.00024 - 0.00079) | |
Repeatability of bidirectional axis positioning (ISO230-2:2014) [mm (inch)] | Less than 0.004 (0.00016) |
- *1 Acceleration must be adjusted for X and Y axes.
- *2 When using high accuracy mode B.
- *3 Brother specifications apply to the pull studs for CTS.
- *4 Actual tool weight differs depending on the configuration and center of gravity. The figures shown here are for reference only.
- *5 Parameter settings must be changed. (Tool magazine indexing time will change.)
- *6 Measured in compliance with JIS B6336-9 and MAS011-1987.
- *7 Spindle motor output differs depemding on the spindle speed.
- *8 Regular air pressure varies depending on the machine specifications, machining program details, or use of peripheral equipment. Set the pressure higher than the recommended value.
- *9 Measured in compliance with ISO standards and Brother standards. Please contact your local distributor for details.
- *10 The machine needs to be equipped with a relocation detection device depending on the destination. Machines equipped with a relocation detection device come with “RD” at the end of the model name.
NC Unit specifications
CNC model | CNC-D00 | |
---|---|---|
Control axes | 5axes ( X, Y, Z, additional axes) | |
Simultaneously controlled axes | Positioning | 5 axes (X, Y, Z, A, B) |
Interpolation |
|
|
Least input increment | 0.001 mm, 0.0001 inch, 0.001 deg. | |
Max.programmable dimension | 9999.999mm, 999.9999inch | |
Display | 15-inch color LCD touch display | |
Memory capacity | 500 Mbytes (Total capacity of program and data bank) | |
External communication | USB interface, Ethernet, RS232C(optional) | |
No.of registrable programs | 4,000 (Total capacity of program and data bank) | |
Program format | NC language, conversation (changed by parameter), conversion from conversation program to NC language program available |
|
Standard NC functions |
|
|
Optional NC functions |
|
- *1 Measuring instrument needs to be prepared by users.
- *2 When the submicron command is used, changing to the conversation program is disabled.
- * "Control axes" and "Simultaneously controlled axes" indicate the maximum number of axes. These are different depending on the destination or specifications.
- * Ethernet is a trademark or registered trademark of XEROX in the United States.
- * Functions listed under (NC) and (Conversation) are available only for NC programs and conversation programs respectively.
For options, please contact us.
Customer considering purchase / Support Information
-
Catalog download
Guide of Compact machining center SPEEDIO catalog download.
-
Distributors - Inquiry & Purchase , Repair & Service
Contact information for distributors in your area.
-
Brother Technology Center
Contact information for Brother Technical Centers in Europe and other areas.