Brother’s original "QT table" pallet changer
The QT(Quick Turn) table is Brother’s original turn table type high-speed 2-face pallet changer. High-speed pallet change is enabled by avoiding lift-up operation while achieving high reliability through a sealed structure. Workpieces on one pallet can be changed while machining workpieces on the other pallet. Therefore, waste in workpiece change time is eliminated, enabling nonstop machining.
Wide jig area
The jig can be mounted on the table even if it extends over the table as long as it is within the turning diameter. The standard jig area is wide, with a 1,020mm turning diameter and 300mm jig height, making mounting the index table jig easier. The jig area can be enlarged optionally so that larger jigs can be mounted.
Examples of highly productive machining
When machining time is short
When machining time is short, the percentage of workpiece change time increases. Therefore, productivity lowers when machines are not equipped with a pallet changer. The R450X1 eliminates waste in workpiece change time to provide high productivity.
Machining time ratio
E.g.) Machining time: 60s, workpiece change time: 15s
Newly developed magazine that promotes process integration
New 22-tool magazine
In addition to the conventional 14-tool magazine specications, the new 22-tool magazine specications have been added. Using both the 22-tool magazine and 2-face pallet changer promotes process integration, contributing to improvement of production efciency.
Brother’s original high productivity technology
Highly-responsive servo motor
Introduction of Customer Success Stories.