SX1
Select variants: S700X1
The SPEEDIO maximizes productive efficiency improvement of mass-production parts such as automobile, motorcycle and information technology.
Information
Overview
The machine has achieved overwhelming high productivity as a result of achieving high acceleration and quick response. In particular, Z-axis acceleration has been greatly improved, which is highly effective for improvement of productivity.
Achievement of high acceleration
As the Z-axis moves most frequently, Z-axis acceleration has been improved to twice the former model.
Z-axis acceleration
Former model → SPEEDIO
1.1G → 2.2G
The X/Y-axes optimal acceleration setting function sets the most appropriate acceleration according to the table loading capacity.
* Acceleration for the S500X1. The loading capacity needs to be set via parameter.
Optimal acceleration according to loading capacity (X/Y-axes)
Max. load → 150kg. load
1.4G / 1.1G → 2.0G / 1.3G
Highly-responsive servo motor
Delay in response has been reduced to almost zero by increasing the responsiveness of the servo motor. For example, high-speed synchronized tapping at the fastest level in the world is completed within much shorter time.
Nonstop ATC
Tool change time is minimized by optimizing the magazine operation and improving the Z-axis acceleration, in addition to the shorter start and stop time of the spindle.
Former model → SPEEDIO
Chip - Chip 1.6S → 1.4S
Former model → SPEEDIO
Tool - Tool 0.9S → 0.8S
Technologies accumulated over years to enhance machine rigidity, and use of a high-power spindle motor allow the machine to demonstrate its broad machining capabilities from high-speed, high-ef¬ciency machining to heavy-duty machining.
Highly rigid structure
Based on accumulated analysis technology data, the machine uses a structure that effectively further improves its rigidity.
High-power spindle motor
Spindle motor torque
Standard specs
Max. torque (momentary): 40Nm
Max. output: 18.9kW
High-torque specs (Optional)
Max. torque (momentary): 92Nm
Max. output: 26.2kW
Pursuit of high accuracy
Resolution of the encoder has greatly improved and various offset functions have been added. These improvements achieve high accuracy for circular machining and pitch machining. The machine structure used is not easily affected by heat expansion due to coolant.
High-speed three-dimensional machining
High-speed and highly accurate three-dimensional machining has been achieved by high-speed spindle specifications and Brother's original three-dimensional machining control, such as the 200-block look-ahead function and smooth path offset function.
High-speed spindle specs (Optional)
Max. spindle speed: 27,000min-1
Look-ahead function
High accuracy mode BⅠ (Standard): 30 blocks
High accuracy mode BⅡ(Optional ): 200 blocks
The machine is equipped with the CNC-C00 series next generation NC unit with greatly improved processing capabilities and functions, and enhanced usability.
Operability
Equipped with 'shortcut' keys to quickly open the desired screen and 'sub folder' to make program management easier, in addition to the USB memory interface, menu programming and tap return function.
Network function
High capacity program data can be transferred via Ethernet at high speed. The simple production monitoring function is also available allowing you to monitor the machine's status.
Machining support functions
Equipped with machining support functions, such as torque waveform display,high accuracy mode, and heat expansion compensation system.
Maintenance functions
Equipped with motor insulation resistance measurement, operationlog, and maintenance notice function.
System capacity
Standard equipped with PLC. Input and output points can be extended to up to 1024 points each (Optional).
Specifications
Product Specification
| item | S700X1 |
|---|---|
| Max. spindle speed | 10,000min-1 10,000min-1 high-torque(Optional) 16,000min-1(Optional) 27,000min-1(Optional) |
| Travels | X:700mm Y:400mm Z:300mm |
| Tool storage capacity | 14pcs./21pcs. |
| Rapid traverse rate (XYZ-area) | 50m/min×50m/min×56m/min |
| Required floor space | 2,050mm×2,220mm |
| BT dual contact spindle(BIG-PLUS) | Optional |
| Coolant Through Spindle(CTS) | Optional |
| item | S500X1 |
|---|---|
| Max. spindle speed | 10,000min-1 10,000min-1 high-torque(Optional) 16,000min-1(Optional) 27,000min-1(Optional) |
| Travels | X:500mm Y:400mm Z:300mm |
| Tool storage capacity | 14pcs./21pcs. |
| Rapid traverse rate (XYZ-area) | 50m/min×50m/min×56m/min |
| Required floor space | 1,560mm×2,220mm |
| BT dual contact spindle(BIG-PLUS) | Optional |
| Coolant Through Spindle(CTS) | Optional |
| item | S300X1 |
|---|---|
| Max. spindle speed | 10,000min-1 10,000min-1 high-torque(Optional) 16,000min-1(Optional) 27,000min-1(Optional) |
| Travels | X:300mm Y:400mm Z:300mm |
| Tool storage capacity | 14pcs./21pcs. |
| Rapid traverse rate (XYZ-area) | 50m/min×50m/min×56m/min |
| Required floor space | 1,080mm×2,557mm |
| BT dual contact spindle(BIG-PLUS) | Optional |
| Coolant Through Spindle(CTS) | Optional |
| Item | S700X1 | S500X1 | S300X1 | ||
|---|---|---|---|---|---|
| CNC Unit | CNC-C00 | ||||
| Travels | X axis [mm (inch)] | 700 (27.6) | 500 (19.7) | 300 (11.8) | |
| Y axis [mm (inch)] | 400 (15.7) | ||||
| Z axis [mm (inch)] | 300 (11.8) | ||||
| Distance between table top and spindle nose end [mm (inch)] | 180 ~ 480 (7.1 ~ 18.9) | ||||
| Table | Work area size [mm (inch)] | 800 x 400(31.5 x 15.7) | 600 x 400(23.6 x 15.7) | 600 x 400(23.6 x 15.7) | |
| Max.loading capacity (uniform load) [kg (lbs)] | 250 [300] (551 [661])*6 | ||||
| Spindle | Spindle speed [min-1] |
10,000min-1 specifications: 10 ~ 10,000
16,000min-1 specifications(Optional) : 16 ~ 16,000 10,000min-1 high-torque specifications(Optional) : 10 ~ 10,000 27,000min-1 specifications(Optional) : 27 ~ 27,000 |
|||
| Speed during tapping [min-1] | Max. 6,000 (27,000min-1 specifications : Max. 8,000) | ||||
| Tapered hole | 7/24 tapered No.30 | ||||
| BT dual contact system (BIG-PLUS) | Optional | ||||
| Coolant Through Spindle (CTS) | Optional(CTS option is not available for 27,000min-1 spec.) | ||||
| Feed rate | Rapid traverse rate (XYZ-area) [m/min (inch/min)] | 50 x 50 x 56 (1,969 x 1,969 x 2,205) | |||
| Cutting feed rate [mm/min (inch/min)] | X,Y,Z: 1 ~ 30,000 ( 0.04 ~ 1,181)*7 | ||||
| ATC unit | Tool shank type | MAS-BT30 | |||
| Pull stad type*4 | MAS-P30T-2 | ||||
| Tool storage capacity [pcs.] | 14 / 21 | ||||
| Max.tool length [mm (inch)] | 250 (9.8) | 160 (6.3) [21tool]
250 (9.8) [14tool] |
|||
| Max.tool diameter [mm (inch)]*1 | 110 (4.3) | ||||
| Max.tool weight [kg (lbs)]*1(kg) | 3.0(6.6) / Tool (TOTAL TOOL WEIGHT:25(55.1) for 14 tools,35(77.2) for 21 tools) | ||||
| Tool selection method | Random shortcut method | ||||
| Tool change time*5 | Tool To Tool[sec.]: 0.8 / Chip To Chip[sec.]: 1.4 / Cut To Cut[sec.]: 1.2 | ||||
| Electric motor | Main spindle motor (10 min/continuous)[kW]*2 | 10,000min-1 specifications : 10.1/6.7
16,000min-1 specifications(Optional) : 7.4/4.9 10,000min-1 high-torque specifications(Optional) : 12.8/8.8 27,000min-1 specifications(Optional) : 8.9/6.3 |
|||
| Axis feed motor [kW] | X,Y: 1.0 / Z: 2.0 | ||||
| Power source | Power supply | AC200V ±10%, 50/60Hz ±1Hz | |||
| Power capacity (continuous) [kVA] | 10,000min-1 specifications : 9.5
16,000min-1 specifications(Optional) : 9.5 10,000min-1 high-torque specifications(Optional) : 10.4A 27,000min-1 specifications(Optional) : 9.5 |
||||
| Air supply | Regular air pressure [MPa] | 0.4 ~ 0.6(recommended value : 0.5MPa)*8 | |||
| Required flow [L/min] | 45 (27,000min-1 specifications:115) | ||||
| Machine dimensions | Height [mm (inch)] | 2,497 (98.3) | |||
| Required floor space (with control unit door open) [mm (inch)] |
2,050 x 2,220[ 2,692] (80.7 x 87.4[ 106.0]) |
1,560 x 2,220[ 2,692] (61.4 x 87.4[ 106.0]) |
1,080 x 2,557[ 2,776] (42.5 x 100.7[ 109.3]) |
||
| Weight (including control unit, machine cover) [kg (lbs)] | 2,400 (5,291) | 2,250 (4,960) | 2,200 (4,850) | ||
| Accuracy*3 | Accuracy of bidirectional axis positioning ( ISO230-2:2006 ) [mm (inch)] |
0.006 ~ 0.020 ( 0.00024 ~ 0.00079 ) | |||
| Repeatability of bidirectional axis positioning ( ISO230-2:2006 ) [mm (inch)] |
Less than 0.004 (0.00016 ) | ||||
| Front door | 2doors | ||||
| Standard accessories | Instruction Manual (1 set), anchor bolts (4 pcs.), leveling bolts (4 pcs.),machine cover (manual door ) | ||||
- *1 Actual tool weight differs depending on the configuration and center of gravity.The figures shown here are for reference only.
- *2 Spindle motor output differs depending on the spindle speed.
- *3 Measured in compliance with ISO standards and Brother standards.
- *4 Brother specifications apply to the pull studs for CTS.
- *5 Measured in compliance with JIS B6336-9 and MAS011-1987.
- *6 Acceleration must be adjusted for X and Y axes.
- *7 When using high accuracy mode B.
- *8 Regular air pressure varies depending on the machine specifications, machining program details, or use of peripheral equipment. Set the pressure higher than the recommended value.
| CNC model | CNC-C00 | |
|---|---|---|
| Control axes | 5axes ( X, Y, Z, additional axes) | |
| Simultaneously controlled axes | Positioning | 5 axes (X, Y, Z, A, B) |
| Interpolation |
|
|
| Least input increment | 0.001mm, 0.0001inch, 0.001° | |
| Max.programmable dimension | ±9999.999mm, ±999.9999inch | |
| Display | 12.1-inch color LCD | |
| Memory capacity | Approx.100 Mbytes (Total capacity of program and data bank) | |
| External communication | USB memory interface, Ethernet, RS232C 1ch | |
| No.of registrable programs | 4,000 (Total capacity of program and data bank) | |
| Program format | NC language, conversation (changed by parameter) conversion from conversation program to NC language program available |
|
| Standard NC functions |
|
|
| Optional NC functions |
|
|
- * When program size is bigger than 2 Mbytes. machine works with extended memory operation.
- * Ethernet is a trademark or registered trademark of XEROX in the United States.
- * Functions listed under (NC) and (Conversation) are available only for NC programs and conversation programs respectively.
- *1 Measuring instrument needs to be prepared by users.
- *2 When the submicron command is used, changing to the conversation program is disabled.
For options, please contact us.
Example
Support
Support Information
