SPEEDIO RXd1

Compare

Contact Distributor

SPEEDIO RXd1

Pallet Changing Compact Machining Center

Select variant:

[ BT30 Vertical compact machining center ]

High-speed dual-pallet changer model
for uninterrupted production
Enables workpiece change/setup during machining

Information

The QT table is Brother’s original high-speed 2-face pallet changer.
With a wide jig area and a high degree of reliability, the QT table enables non-stop machining to achieve high productivity.

High-speed pallet change

The QT (Quick Turn) table is a turntable type high-speed 2-face pallet changer.
Optimized acceleration/deceleration control achieves much faster pallet change.

Pallet change time

R450Xd1: 2.9 s → 2.7 s
R650Xd1: 3.4 s → 3.1 s

Non-stop machining

Workpieces on one pallet can be changed while machining workpieces on the other pallet. Waste in workpiece change time is eliminated, enabling non-stop machining.

Large jig area

Even if the jig protrudes from the table, it can be mounted as long as it is within the pallet turning diameter. The jig area can be further expanded by selecting a low table option that increases the jig height or a turning diameter enlargement option that increases the jig space.

Max. jig height

R450Xd1: 　350 → 380
R650Xd1: 　420 → 450

Including a newly developed 28-tool magazine, a 40-tool magazine with a maximum storage capacity is available in response to a variety of machining needs.
Overwhelming high productivity is achieved by utilizing advantages of machine/controller integrated development, including optimized and faster simultaneous operation and tool change operation.

28-tool magazine

A new compact turret type 28-tool magazine has been developed with high-speed tool change performance maintained. This expands the range of target machining parts and promotes process integration.

40-tool magazine (R650Xd1)

In addiiton to 14/22/28-tool magazines, a 40-tool magazine is available. This promotes process integration, taking advantage of a 2-face pallet changer, and encourages producitivty improvement.

For the 40-tool magazine, the machining room is separated from the tool stocker by a shutter type door. This prevents chips entering the magazine.

Simultaneous operation

Equipped with a simultaneous operation control that simultaneously performs tool change, QT table turn, and positioning of X/Y and additional axes. This avoids any wasted pallet change time.

High rigidity based on a special design and use of a high-torque spindle motor achieves stable machining while demonstrating high machining capability.

From heavy-duty machining to high-speed and highly efficient machining

A spindle motor with high torque in the medium- and high-speed range is used to achieve high-speed and highly efficient machining. In addition, the high-torque spec. (optional) machine greatly improves torque in the low-speed range. The machine provides excellent performance in heavy-duty machining of iron.

High-torque spec. (optional)

Max. torque : 92Nm
Max. output : 26.2kW

Standard spec.

Max. torque : 40Nm
Max. output : 18.9kW

High-speed and highly accurate three-dimensional machining

In addition to the highly responsive servomotor, the servo processing speed and resolution have been greatly improved. Enhanced performance of original three-dimensional machining control, including a great increase in look-ahead blocks and improved surface quality by the smooth path offset function, achieves high-speed and highly accurate three-dimensional machining.

Simple setting for high accuracy mode
Machining accuracy/surface quality parameters can be adjusted by simple operation. This helps achieve high-quality machining easily.

High accuracy mode BI : Look-ahead 160 blocks
High accuracy mode BII (optional) : Look-ahead 1000 blocks

7 MPa Coolant Through Spindle (CTS) (optional)

The CTS option can be selected from 3 MPa or 7 MPa. With this option, the machine can operate to its fullest potential in high-speed drilling or peck drilling.

Intuitive operation is possible with new apps and vertical touch panel screen. Relevant functions are grouped according to purpose, such as setup and machining, leading to efficient operation. Production and operation states are visualized, allowing faster understanding. Waste-free operation is possible in setup, machining adjustment, production, and recovery process, leading to improved work efficiency and operating rate.

Home screen

Information required for production, such as workpiece counter and tool life, is collected on the home screen. Shortcut keys are provided for screens frequently used so you can open them by one touch.

New user interface

Usability has been greatly improved by grouping relevant functions, creating new support apps that are intuitive with improved operability and visibility, providing useful accessories (calculator, notebook, file viewer etc.), and making operation on conventional screens possible on the touch panel.

Product Specification

Machine Specification

item			R450Xd1 / R450Xd1 RD ^*12	R650Xd1 / R650Xd1 RD ^*12 14/22/28 tool magazine	R650Xd1 / R650Xd1 RD ^*12 40-tool magazine
CNC unit			CNC-D00
Travels	X axis [mm (inch)]		450 (17.7)	650 (25.6)
	Y axis [mm (inch)]		320 (12.6) ^*7	400 (15.7)
	Z axis [mm (inch)]		305 (12.0)	305 (12.0)	435 (17.1)
	Distance between table top and spindle nose end [mm (inch)]		200-505 (7.9-19.9) [280-585 (11.0-23.0) ^*8	250-555 (9.8-21.8) [350-655 (13.8-25.8) ^*8]	250-685 (9.8-27.0) [350-785 (13.8-30.9) ^*8]
Table	Work area size [mm (inch)]		One face 600 x 300 (23.6 x 11.8)	One face 800 x 400 (31.5 x 15.7)
	Max.loading capacity (uniform load) [kg (lbs)]		One face 120 (265) [200 (441) ^*6]	One face 200 (441) [300 (661) ^*6]
	Position time [sec.]		2.7 ^*11	3.1 ^*11
Spindle	Spindle speed [min^-1]		10,000min^-1 specifications : 1 - 10,000 16,000min^-1 specifications(Optional) : 1 - 16,000 10,000min^-1 high-torque specifications(Optional) : 1 - 10,000
	Speed during tapping [min^-1]		MAX. 6,000
	Tapered hole		7/24 tapered No.30
	BT dual contact system (BIG-PLUS)		Optional
	Coolant Through Spindle (CTS)		Optional
Feed rate	Rapid traverse rate (XYZ-area) [m/min (inch/min)]		50 x 50 x 50 (1,969 x 1,969 x 1,969)
Feed rate	Cutting feed rate [mm/min (inch/min)]		X, Y, Z axis: 1 - 30,000 (0.04 - 1,181) ^*9
ATC unit	Tool shank type		MAS-BT30
	Pull stud type ^*4		MAS-P30T-2
	Tool storage capacity [pcs.]		14/22/28	14/22/28	40
	Max.tool length [mm (inch)]		200 (7.9)	200 (7.9)	250 (9.8)
	Max.tool diameter [mm (inch)]		80 (3.1)	80 (3.1)	55 (2.1) / 125 (4.9) No adjacent tool
	Max.tool weight [kg (lbs)] ^*1		3.0 (6.6) (total tool weight : 25 (55.1) for 14-tool, 40 (88.2) for 22/28 tool)	3.0 (6.6) (total tool weight: 25 (55.1) for 14-tool, 40 (88.2) for 22/28 tool)	4.0 (8.8) (total tool weight: 80 (176.3))
	Tool selection method		Random short cut method	Random short cut method	Double arm method (random closet path)
Tool change time ^*5	Tool To Tool [sec.]		0.6 / 0.7 (14-tool / 22 or 28 tool)	0.6 / 0.8 (14-tool / 22 or 28 tool)	0.9
Tool change time ^*5	Chip To Chip [sec.]		1.3 / 1.5 (14-tool / 22 or 28 tool)	1.4 / 1.5 (14-tool / 22 or 28 tool)	2.5
Electric motor	Main spindle motor (10 min/continuous)[kW] ^*2		10,000min^-1 specifications : 10.1/7.0 16,000min^-1 specifications(Optional) : 7.4/5.1 10,000min^-1 high-torque specifications(Optional) : 12.8/9.2
Electric motor	Axis feed motor [kW]		X, Y axis : 1.0 , Z axis : 1.8
Power source	Power supply		AC 200 to 230 V±10％, 3-phase, 50/60Hz±2%
	Power capacity (continuous) [kVA]		10,000min^-1 specifications : 9.5 16,000min^-1 specifications(Optional) : 9.5 10,000min^-1 high-torque specifications(Optional) : 10.4
	Air supply	Regular air pressure [MPa]	0.4 - 0.6 (recommended value: 0.5MPa ^*10)
	Air supply	Required flow [L/min]	45	45	100
Machine dimensions	Height [mm (inch)]		2,584 (101.7)	2,704 (106.5)
	Required floor space ^*13 [with control unit door open] [mm (inch)]		1,400 x 2,609 [3,448] (55.1 x 102.7 [135.7] )	1,830 x 3,029 [3,868] (72.0 x 119.3 [152.3] )	2,145 x 3,029 [3,868] (84.4 x 119.3 [152.3] )
	Weight (including control unit, machine cover) [kg (lbs)]		2,750 (6,063)	3,550 (7,826)	4,150 (9,149)
Accuracy^*3	Accuracy of bidirectional axis positioning (ISO230-2:1988) [mm (inch)]		0.006 - 0.020 (0.00024 - 0.00079)
Accuracy^*3	Repeatability of bidirectional axis positioning (ISO230-2:2014) [mm (inch)]		Less than 0.004 (0.00016)
Front door			2doors
Standard accessories			Instruction Manual (DVD 1 set), leveling bolts (4 pcs.) [R650Xd1: 5 pcs.], leveling plate (4 pcs.) [R650Xd1: 5 pcs.]

*1 Actual tool weight differs depending on the configuration and center of gravity. The figures shown here are for reference only.
*2 Spindle motor output differs depending on the spindle speed.
*3 Measured in compliance with ISO standards and Brother standards. Please contact your local distributor for details.
*4 Brother specifications apply to the pull studs for CTS.
*5 Measured in compliance with JIS B6336-9 and MAS011-1987.
*6 Can be increased up to R450Xd1: 200kg, R650Xd1: 300kg (one face) by changing the parameter. Please consult us separately.
*7 When using the hydraulic rotary joint, the Y-axis travel becomes 290 mm.
*8 Values when the low-floor table is selected.
*9 When using high accuracy mode B.
*10 Regular air pressure varies depending on the machine specifications, machining program details, or use of peripheral equipment. Set the pressure higher than the recommend value.
*11 When table loading on one face is R450Xd1: 120kg, R650Xd1: 200kg.
*12 The machine needs to be equipped with a relocation detection device depending on the destination. Machines equipped with a relocation detection device come with "RD" at the end of the model name.
*13 The value does not include the coolant tank or chip conveyor.

Quick turn table specifications

Item	R450Xd1	R650Xd1
Type	0 deg./180 deg. turntable system	0 deg./180 deg. turntable system
Table dimension [mm (inch)]	One face 600 x 420 (23.6 x 16.5)	One face 800 x 535 (31.5 x 21.1)
Max. turning diameter [mm (inch)]	D1,020 (40.2) [D1,100 (43.3)] ^*14	D1,250 (49.2) [D1,300 (51.2)] ^*14
Max. jig height [mm (inch)]	300 (11.8) [380 (15.0)] ^*8	350 (13.8) [450 (17.7)] ^*8
Table work area size [mm (inch)]	One face 600 x 300 (23.6 x 11.8)	One face 800 x 400 (31.5 x 15.7)
Max. loading capacity [kg (lds)]	One face 120 (265) [200 (441)] ^*6	One face 200 (441) [300 (661)] ^*6
Rated table load inertia for turning axis [kg·m2]	One face 14.2 [23.5] ^*6	One face 35.8 [53.7] ^*6
Table turning system	AC servo motor(1kW) Worm gear (total speed reduction ratio:1/50)	AC servo motor(0.82kW) Worm gear (total speed reduction ratio:1/60)
Table position time	2.7 ^*11	3.1 ^*11
Table change repeatability [mm (inch)]	0.005 (0.0002) (in the X,Y, and Z axes directions 270(10.6) from the center of rotation)	0.005 (0.0002) (in the X,Y, and Z axes directions 335(13.2) from the center of rotation)

* Quick Turn table is a turntable type 2-face pallet changer.

NC unit specifications

CNC model		CNC-D00
Control axes		7 axes (X, Y, Z, four additional axes)
Simultaneously controlled axes	Positioning	5 axes (X, Y, Z, A, B)
Simultaneously controlled axes	Interpolation	Linear : 4 axes (X, Y, Z, one additional axis) Circular : 2 axes Helical/Conical : 3 axes (X, Y, Z)
Least input increment		0.001mm、0.0001inch、0.001 deg.
Max.programmable dimension		±999999.999mm、±99999.9999inch
Display		15-inch color LCD touch display
Memory capacity		500 Mbytes, 3 Gbytes (optional) (Total capacity of program and data bank)
External communication		USB memory interface, Ethernet, RS232C (optional)
No.of registrable programs		4,000 (Total capacity of program and data bank)
Program format		NC language, conversation (changed by parameter) Conversation from conversation program to NC language program available

* Number of "control axes" and/or "simultaneously controlled axes" are the maximum number of axes, which will differ depending on the destination country and the machine specifications.
* Ethernet is a trademark or registered trademark of XEROX in the United States.

NC functions

Operation	Dry run Machine lock Program restart Rapid traverse override Cutting feed override Background editing Screen shot Operation level External input signal key < optional > Spindle override
Programming	Absolute / Incremental Inch / Metric Coordinate system setting Corner C / Corner R Rotational transformation Synchronized tap Subprogram Graphic display
Measurement	Automatic workpiece measurement ^*1 Tool length measurement
High speed and high accuracy	Machining parameter adjustment High-accuracy mode AIII High-accuracy mode BI (look-ahead 160 blocks) Backlash compensation < optional > High accuracy mode BII (Look-ahead 1,000 blocks, smooth path offset)
Monitoring	Machining load monitoring ATC monitoring Overload prediction Waveform display / Waveform output to memory card Heat expansion compensation system ll (X, Y, and Z axes) Production performance display Tool life / Spare tool
Maintenance	Tap return function Status log Alarm log Operation log Motor insulation resistance measurement Tool washing filter with filter clogging detection Breake load test
Automatic / Network	Computer remote OPC UA Auto notification Built-in PLC (LD/ST/FBD) < optional > CC-Link, master station CC-Link, remote device station PROFIBUS DP, slave DeviceNet, slave PROFINET, slave EtherNet/IP, slave
Energy saving	Automatic power off Standby mode Automatic coolant off Automatic work light off Chip shower off delay
Support apps	Adjust machine parameters ATC tool Tool life Waveform display Production performance Power consumption Recovery support Inspection PLC
Accessories	File viewer Notebook Calculator Register shortcut Display off
Functions limited to NC language	Menu programming Local coordinate system Expanded workpiece coordinate system One-way positioning Inverse time feed Programmable data input Tool length compensation Cutter compensation Scaling Mirror image External sub program call Macro Operation in tape mode Multiple skip function < optional > Submicron command ^2 Interrupt type macro Rotary fixture offset Fixture coordinates setting ^3 Involute interpolation
Functions limited to conversation	Operation program Schedule program Automatic tool selection Automatic cutting condition setting Automatic tool length compensation setting Automatic cutter compensation setting Automatic calculation of unknown number input Machining order control

*1 Measuring instrument needs to be prepared by users.
*2 When the submicron command is used, changing to the conversation program is disabled.
*3 There are restrictions on the axis configuration.