Special SPEEDIO Option

Rotary Table T-200

Rotary Table T-200 High accuracy, High productivity, Extended service life.

Rotary Table T-200

Features of Rotary Table T-200

High accuracy
High-accuracy machining achieved by mechanism with no backlash.

High productivity
Achieved by the maximum speed of 100 min-1.

Extended service life
Permanent high accuracy with very little deterioration over time.

Features of Rotary Table T-200

Roller Gear Cam Mechanism

By preloading the input and output shafts beforehand, the four cam followers can be always kept in contact with the cam surface, which eliminates backlash and provides high rigidity. In addition, the cam followers that rotate can transmit the motor torque efficiently, and therefore, they can rotate at low torque and be used for a long term, without wear and adjustment.

Roller Gear Cam Mechanism

Support table

A support table necessary for use with a Trunnion jig is available.

Clamp torque
330N・m

  • *: When support table with clamp is selected.
Support table

Rotary joint for rotary table

The rotary table has a built-in rotary joint to prevent ejection.

6 Ports: Hydraulic / Pneumatic (With center-through port)

  • *: Please consult us separately when using a rotary joint for the support table.
Rotary joint for rotary table

Example of use

Mounted on S500X1

Mounted on S500X1

Mounted on S1000X1

Mounted on S1000X1

Specifications

Type Right-handed, Left-handed*1
Through hole diameter 70H7mm /2.8H7inch
Center height 170mm /6.7inch
Gear ratio 1/20
Maximum speed 100min‒1 (50min‒1*2)
Bi-directional positioning accuracy (ISO230-2 compliant) 20s or less
Bi-directional positioning repeatability (ISO230-2 compliant) 10s or less
Indexing accuracy*3 10s or less
Repeatability*3 4s or less
Maximum loading capacity 100kg /220lbs (200kg / 440lbs *4)
Allowable work inertia 1.0kg・m2 /23.7lbs・ft2 (4.0kg・m2 /94.8lbs・ft2 *2)
Allowable unbalanced load 5.0kg・m /36.2ft・lbs
Clamp method Pneumatic
Clamp torque 280N・m /207ft・lbs (at 0.5Mpa)
Maximum holding torque *5 720N・m /531ft・lbs (at 0.5MPa)
Product weight 67kg /148lbs
Applicable models S300X1 / S500X1 / S700X1 / S1000X1 / R450X1 / R650X1
  • *1: Only right-handed type available for R450X1 and R650X1.
  • *2: When high inertia mode (enabled by changing parameter setting) is used.
  • *3: Based on Brother measurement standard.
  • *4: When support table is used.
  • *5: Obtainted by the clamp torque plus the motor’s holding torque.

Customer considering purchase / Support Information

Special Site

We use cookies to personalise and improve your experience on the Brother International website.By continuing through the site we will assume you are accepting our use of cookies. To find out more click here.

Find out more Accept