SPEEDIO

S1000X1 Features

"Machining larger workpieces using #30 machine"
The release of the S1000X1 machining center sees an override in the conventional machining areas of #30 machines.
Continuing in the spirit of overwhelming high productivity,
the machine will launch a challenge to new machining areas,
boosting our "Brother also in this process" concept.

Machining Area

Sufficient travels and table size

Increase in X- and Y-axes travels and expansion of the machining area have enabled large workpiece machining and large jig mounting, which were not possible on conventional #30 machines.

Mounting large jigs possible

A wider, longer jig area has been secured, enabling mounting of large jigs. 150 mm, 250 mm, and 350 mm high columns (optional) are available to meet customers' needs.

Productivity

Simultaneous operation control

Wasted time has been further reduced by simultaneously performing tool change and positioning X/Y and additional axes.

Fast acceleration/deceleration spindle

Using a fast acceleration/deceleration spindle motor enables the spindle to start and stop in an extremely short time.

Spindle start/stop time

0.15s

Nonstop ATC

High-speed tool change has been achieved by optimizing and increasing the speed of spindle start/stop, Z-axis up/down, and magazine movement.

Chip - Chip : 1.4s
Tool - Tool : 0.8s

Highly-responsive servomotor

Delay in response has been reduced to almost zero by increasing the responsiveness of the servomotor. High-speed synchronized tapping at the fastest level in the world has been achieved.

High reliability

High reliability

Chip discharge performance has been improved along with the expansion of the machining area. In addition, the machine is equipped with a variety of functions, such as air-assisted tool washing, to improve reliability.

Roof shape telescopic cover

Roof shape telescopic covers are used for the X/Y-axes to quickly discharge chips from the machining area. Installing two chip shower pumps has doubled the flow rate.

High environmental performance

High environmental performance

In addition to low power and air consumption, the machine is equipped with a power regeneration system and a variety of energy saving functions, achieving high environmental performance.

Customer Successes

Introduction of Customer Success Stories.

Customer considering purchase

Support Information

Machine Tools lineup

We use cookies to personalise and improve your experience on the Brother International website.By continuing through the site we will assume you are accepting our use of cookies. To find out more click here.

Find out more Accept