SPEEDIO R450X1

Compare

Contact Distributor

Discontinued Product

Discontinued Product

SPEEDIO R450X1

Pallet Changing Compact Machining Center

Pallet Changer
14 Tool Magazine
22 Tool Magazine

Travels (mm): X: 450 Y: 320 Z: 305
Max. spindle speed (min^-1): 10,000/ (Optional) 16,000/ (Optional) 10,000 high-torque
Tool storage capacity(pcs.): 14/ 22

A new model that is standard equipped with a pallet changer has been added to the SPEEDIO series that achieve overwhelming productivity. Quest for "Wasted Time = Zero"

Information

Non-stop machining

The QT(Quick Turn) table is Brother’s original turn table type high-speed 2-face pallet changer. High-speed pallet change is enabled by avoiding lift-up operation while achieving high reliability through a sealed structure. Workpieces on one pallet can be changed while machining workpieces on the other pallet. Therefore, waste in workpiece change time is eliminated, enabling nonstop machining.

Pallet change time

2.9s

Wide jig area

The jig can be mounted on the table even if it extends over the table as long as it is within the turning diameter. The standard jig area is wide, with a 1,020mm turning diameter and 300mm jig height, making mounting the index table jig easier. The jig area can be enlarged optionally so that larger jigs can be mounted.

Process integration

Processes divided between two machines can be performed on one machine, making use of the 2-face pallet changer. Process integration improves the line balance and enables optimal equipment investment.

When machining time is short

When machining time is short, the percentage of workpiece change time increases. Therefore, productivity lowers when machines are not equipped with a pallet changer. The R450X1 eliminates waste in workpiece change time to provide high productivity.

Machining time ratio
E.g.) Machining time: 60s, workpiece change time: 15s

New 22-tool magazine

In addition to the conventional 14-tool magazine specications, the new 22-tool magazine specications have been added. Using both the 22-tool magazine and 2-face pallet changer promotes process integration, contributing to improvement of production efciency.

Tool storage capacity 22tools
Tool - Tool : 0.9S
Chip - Chip : 1.7S

* The 14-tool magazine that features high cost performance can also be selected. Tool change time has been reduced even more than before.(Tool - Tool: 0.8s, Chip-Chip: 1.6s)

Simultaneous operation

The machine is equipped with a simultaneous operation function where the XY and additional axes are positioned and tools are changed simultaneously when the QT table turns. This does not waste any pallet change time, enabling non-stop machining in our quest for "Wasted time = Zero".

Highly-responsive servo motor

Delay in response has been reduced to almost "zero" by increasing the responsiveness of the servo motor. For example, synchronized tapping, the fastest in the world, is completed within much shorter time.

Product Specification

R450X1

Max. spindle speed

10,000/ (Optional) 16,000/ (Optional) 10,000 high-torque

Travels

X: 450 Y: 320 Z: 305

Tool storage capacity

14/ 22

Rapid traverse rate (XYZ-area)

50 x 50 x 50

Required Floor Space

1,400 x 2,654

BT dual contact spindle(BIG-PLUS)

Optional

Coolant Through Spindle(CTS)

Optional

Low floor table

Optional

Machine Specification

item			R450X1
CNC unit			CNC-C00
Travels	X axis [mm (inch)]		450 (17.7)
	Y axis [mm (inch)]		320 (12.6)^*7
	Z axis [mm (inch)]		305 (12.0)
	Distance between table top and spindle nose end [mm (inch)]		200 - 505 (7.9 - 19.9) [250 - 555 (9.8 - 21.9)] ^*8
Table	Work area size [mm (inch)]		600 x 300 (23.6 x 11.8) (one face)
Table	Max. loading capacity (uniform load) [kg (lbs)]		120 (265) [200 (441)] (one face)^*6
Spindle	Spindle speed [min^-1]		10,000min^-1 specifications : 10 - 10,000 16,000min^-1 specifications(optional) : 16 - 16,000 10,000min^-1 high-torque specifications(optional) : 10 - 10,000
	Speed during tapping [min^-1]		MAX. 6,000
	Tapered hole		7/24 tapered No.30
	BT dual contact system (BIG-PLUS)		Optional
	Coolant Through Spindle (CTS)		Optional
Feed rate	Rapid traverse rate (XYZ-area) [m/min (inch/min)]		50 x 50 x 50 (1,969 x 1,969 x 1,969)
Feed rate	Cutting feed rate [mm/min (inch/min)]		1 - 30,000 (0.04 - 1,181) (X, Y, Z)^*9
ATC unit	Tool shank type		MAS-BT30
	Pull stad type^*4		MAS-P30T-2
	Tool storage capacity [pcs.]		14/22
	Max. tool length [mm (inch)]		200 (7.9)
	Max. tool diameter [mm (inch)]		80 (3.1)
	Max. tool weight [kg (lbs)]^*1		3.0 (6.6) (total tool weight : 25 (55.1) for 14 tools, 40 (88.2) for 22 tools)
	Tool selection method		Random shortcut method
Tool change time^*5	Tool To Tool [sec.]		0.8/0.9 (14 tool/22 tool)
	Chip To Chip [sec.]		1.6/1.7 (14 tool/22 tool)
	Cut to Cut [sec.]		1.3/1.4 (14 tool/22 tool)
Electric motor	Main spindle motor (10 min/continuous) [kW]^*2		10,000min^-1 specifications : 10.1/6.7 16,000min^-1 specifications : 7.4/4.9 10,000min^-1 high-torque specifications : 12.8/8.8
Electric motor	Axis feed motor [kW]		1.0 (X,Y), 1.8 (Z)
Power source	Power supply		AC200V ±10%, 50/60Hz ±1Hz
	Power capacity (continuous) [kVA]		10,000min^-1 specifications : 9.5 16,000min^-1 specifications : 9.5 10,000min^-1 high-torque specifications : 10.4
	Air supply	Regular air pressure [MPa]	0.4 - 0.6 (recommended value : 0.5MPa)^*10
	Air supply	Required flow [L/min]	50
Machine dimensions	Height [mm (inch)]		2,588 (101.9)
	Required floor space (with control unit door open) [mm (inch)]		1,400 x 2,654 [3,344] (55.1 x 104.5 [131.7])
	Weight [kg (lbs)]		2,700 (5,954)
Accuracy^*3	Accuracy of bidirectional axis positioning (ISO230-2:2006) [mm (inch)]		0.006 - 0.020 (0.00024 - 0.00079)
Accuracy^*3	Repeatability of bidirectional axis positioning (ISO230-2:2006) [mm (inch)]		Less than 0.004 (0.00016)
Standard accessories			Instruction Manual (1 set), anchor bolts (4 pcs.), leveling bolts (4 pcs.)

*1 Actual tool weight differs depending on the configuration and center of gravity. The figures shown here are for reference only.
*2 Spindle motor output differs depending on the spindle speed.
*3 Measured in compliance with ISO standards and Brother standards. Please contact Brother for details.
*4 Brother specifications apply to the pull studs for CTS.
*5 Measured in compliance with JIS B6336-9 and MAS011-1987.
*6 Can be increased up to 200kg (one face) by changing the parameter. Please consult us separately.
*7 When using the hydraulic rotary joint, the Y-axis travel becomes 290mm.
*8 Values when the low-floor table is selected.
*9 When using high accuracy mode B.
*10 Regular air pressure varies depending on the machine specifications, machining program details, or use of peripheral equipment. Set the pressure higher than the recommended value.

Quick turn table specifications

Type	0 deg./180 deg. turntable system
Table dimension [mm (inch)]	600 x 420 (23.6 x 16.5) (one face)
Max. turning diameter [mm (inch)]	D1,020 (40.2) [D1,100 (43.3)]^*1
Max. jig height [mm (inch)]	300(11.8) [350 (13.8)]^*2
Table work area size [mm (inch)]	600 x 300 (23.6 x 11.8) (one face)
Max. loading capacity [kg (lds)]	120 (265) [200 (441)] (one face)^*3
Rated table load inertia for turning axis [kg·m²]	14.2 [23.5] (one face)^*3
Table turning system	AC servo motor (1kW) Worm gear (total speed reduction ratio:1/50)
Table position time	2.9s^*4td>
Table change repeatability [mm (inch)]	0.01 (0.0004) (in the X,Y, and Z axes directions 270(10.6) from the center of rotation)

*1 When the turning diameter enlargement option is selected.
*2 Values when the low-floor table is selected.
*3 Can be increased up to 200kg (one face) by changing the parameter. Please consult us separately.
*4 When table loading on one face is 120kg.

*: Quick turn table is a turntable type 2-face pallet changer

NC unit specifications

CNC model		CNC-C00
Control axes		7 axes (X,Y,Z,4 additional axes)
Simultaneously controlled axes	Positioning	5 axes (X,Y,Z,A,B)
Simultaneously controlled axes	Interpolation	Linear : 4 axes (X,Y,Z one additional axis) Circular : 2 axes Helical/conical : 3 axes (X,Y,Z)
Least input increment		0.001mm, 0.0001inch, 0.001 deg.
Max.programmable dimension		±9999.999mm　±999.9999inch
Display		12.1-inch color LCD
Memory capacity		Approx.100 Mbytes (Total capacity of program and data bank)
External communication		USB memory interface, Ethernet, RS232C
No.of registrable programs		4,000 (Total capacity of program and data bank)
Program format		NC language, conversation (changed by parameter) conversion from conversation program to NC language program available
NC function		Absolute / incremental Inch / metric Corner C / Corner R Rotational transformation Synchronized tap Coordinate system setting Dry run Restart Backlash compensation Pitch error compensation Rapid traverse override Cutting feed override Alarm history (1,000 pieces) Startus log Machine lock Computer remote Built-in PLC Motor insulation resistance measurement Operation log High-accuracy mode A III Tool length measurement Tool life management / spare tool Background editing Graphic display Subprogram Herical / conical interpolation Standby mode (energy saving function) Chip shower off delay Tap return function Automatic work light off (energy saving function) Automatic workpiece measurement^*1 Heat expansion compensation system II (X,Y,Z axes) Automatic power off (energy saving function) Automatic coolant off (energy saving function) Tool washing filter with filter clogging detection Waveform display Operation level External input signal key High accuracy mode BI (look-ahead 30blocks) Expanded workpice coordinate system (NC) Scaling (NC) Mirror image (NC) Menu programming (NC) Program compensation (NC) Tool length compensation (NC) Cutter compensation (NC) Macro function (NC) Local coordinate system (NC) One-way positioning (NC) Opeation in tape mode (NC) Operation program (Conversation) Schedule program (Conversation) Automatic tool selection (Conversation) Automatic cutting condition setting (Conversation) Autmatic tool length compensation setting (Conversation) Autmatic cutter compensation setting (Conversation) Autmatic calculation of unknown number input (Conversation) Machining order control (Conversation)
Optional NC functions		Memory expansion (Approx. 500 Mbytes) High accuracy mode B II (look-ahead 200 blocks, smooth path offset) Spindle override Submicron command (NC)^*2 Interrupt type macro (NC)

*1 Measuring instrument needs to be prepared by users.
*2 When the submicron command is used, changing to the conversation program is disabled.

*: When program size is bigger than 2 Mbytes, machine works with extended memory operation.
*: Ethernet is a trademark or registered trademark of XEROX in the United States.
*: Functions listed under (NC) and (Conversation) are available only for NC programs and conversation programs respectively.

For options, please contact us.

For machining industries in Automotive parts