M200Xd1 Features

  • M200Xd1
  • M200Xd1
  • M200Xd1
  • M200Xd1

Provides high productivity, from complex machining by turning and milling to multi-face machining.
When equipped with our newly developed 28-tool magazine, the machine further encourages process integration.

M200Xd1 / M200Xd1-5AX Product introduction

M200Xd1 Seminar video

video thumbnail
1.Advantages of Multi tasking Machine

video thumbnail

video thumbnail
3.Enhanced Extensive Functions(4min36s)

video thumbnail
4.Pursuit of High Productivity(2min04s)

video thumbnail
5.Advanced New D00 Control(6min32s)

video thumbnail
6.Untiring Improvement of Reliability(2min09s)

video thumbnail
7.Machining Demonstration(2min22s)

Mass Production Type Multi-Tasking Machine

From complex machining to multi-face machining
Process integration by mass production type multi-tasking machine

A tilting rotary table with a turning spindle is mounted on the machine.
Processes are integrated on one machine, from complex machining by turning and milling to multi-face machining.

Complex machining

Turning and milling can be completed through one-time chucking on one machine.
There is no handling between turning and milling, leading to various advantages.

Advantages of complex machining

・Reduction of handling time between machines
・Reduction of operators
・Improvement of machining accuracy through one-time chucking

Multi-face machining

As the machine is equipped with a tilting rotary table capable of high-speed indexing, performing multi-face machining makes process integration possible.

0 to 90-deg. indexing time

A-axis 0.6s
C-axis 0.7s

Sufficient machining area is secured when the tilt axis (A-axis) is at 90 degrees.
(Y-axis travel from table surface when A-axis is at 90 degrees. 330 mm)

28-tool magazine

Using our newly developed 28-tool turret magazine further promotes process integration by complex machining or multi-face machining.

* The 22-tool magazine can be selected.


Untiring pursuit of high productivity and a broad variation of jig mounting

Utilizing advantages of machine/controller integrated development, such as faster and optimized simultaneous operation and tool change operation, outstanding high productivity has been achieved.
A variety of jigs can be mounted to cover complex machining to multi-face machining.

Non-stop ATC

High-speed tool change has been achieved by faster and optimized spindle start/stop, Z-axis up/down, and magazine operation.

28-tool magazine

Chip to Chip 1.4s
Tool to Tool 0.8s

Simultaneous operation

Wasted time has been reduced by simultaneously performing tool change and positioning X/Y and A/C axes.

High acceleration/deceleration spindle

Using a low inertia spindle and high acceleration/deceleration spindle motor has achieved faster spindle start/stop. In addition, the turning spindle with DD motor achieves high acceleration/deceleration speed.

Spindle start/stop time

Milling spindle 0.2s or less
Turning spindle 0.3s or less

Machining Capability

Demonstrates high machining capabilities
from milling to turning processes

A high-power motor is used for the milling spindle and the turning spindle. The tilting rotary table provides high clamp force.
These features ensure that the machine demonstrates high machining capabilities in complex machining or multi-face machining.
Tool center point control has been added to support simultaneous five-axis machining.

Milling process

As the spindle can provide high torque in the medium- and high-speed range, the machine fully demonstrates its capabilities in high-speed and highly efficient machining of aluminum or iron.

10,000 min-1 (standard)

Max. torque 40N・m
Max. output 18.9kW

Turning process

Highly efficient machining is achieved by the high-power turning spindle with a maximum speed of 2,000 min-1, and the turning tool secured by the double plunger lock.

Turning spindle

Max. torque 55N・m
Max. output 8.7kW

C-axis clamp

The C-axis with high clamp force enables more stringent cutting conditions to be set for machining that results in load being applied in the rotation direction, improving production efficiency.

C-axis clamp torque 345N・m


Equipped with new “CNC-D00” controller for improved usability
Enhanced accessibility to make setup easier

Intuitive operation is possible with new apps and 15-inch vertical LCD touch panel display.
Waste-free operation is possible in setup, machining adjustment, production, and recovery process,
leading to improved work efficiency and operating rate.
Accessibility to the machine has been enhanced to enable smooth setup including workpiece change.

New user interface

Usability has been greatly improved by grouping relevant functions, creating new support apps that are intuitive with improved operability and visibility, providing useful accessories (calculator, notebook, file viewer etc.), and making operation on conventional screens possible on the touch panel.

Accessibility and workability

The jig or workpiece can be tilted toward the operator, which enables operators to perform setup, including workpiece change, without any strain.

Customer Successes

Introduction of Customer Success Stories.

Customer considering purchase

Support Information

Machine Tools lineup

This website is using cookies. By continuing to browse, you are accepting our Terms and Conditions.

Find out more Accept